Diesel Performance Engineering

Diesel Performance Engineering From your farm truck to multi-charger unlimited pulling tractors and everything in between, we'll get you what you need. Located at 201 North 5th Street in Savannah, Missouri
(10)

Mission: From bone stock to the baddest of the bad, we can diagnose, repair, design, and build Championship proven fuel injection and turbocharger systems.

Payment Options:   Amex Cash Discover Mastercard Visa

Operating as usual

We've always been told that we're special by our mamas, but it's good to know the government now considers us essential ...
03/25/2020

We've always been told that we're special by our mamas, but it's good to know the government now considers us essential as well. We're proud to still be working and serving our over the road boys, farmers, construction workers, and diesel enthusiasts. #turbotuesday #diesellife #stillworking #workhardplayhard #cumminsnation #holsetturbo #mechaniclife @ Diesel Performance Engineering

Business is operating the same as usual over here at DPE with the exception of using more Clorox wipes (No, the wipes ar...
03/20/2020

Business is operating the same as usual over here at DPE with the exception of using more Clorox wipes (No, the wipes are not for sale!). Today we finished up a 3 cylinder Yanmar pump for a John Deere lawn mower that had some worn out weights and camshaft. #fuelpumpfriday #johndeere #dieselnation #diesellife #mechaniclife #yanmar @ Diesel Performance Engineering

You know it's not a good sign when a customer brings you a turbo and these are the views you see from both sides. #cummi...
03/18/2020

You know it's not a good sign when a customer brings you a turbo and these are the views you see from both sides. #cumminsnation #hx40 #holsetturbo #turbotuesday #turbolife #turbodiesel #diesellife #dieselnation @ Diesel Performance Engineering

Turbos like this Navistar Maxxforce BorgWarner do NOT like EGR cooler failures. Luckily this one that we remanned only t...
03/11/2020

Turbos like this Navistar Maxxforce BorgWarner do NOT like EGR cooler failures. Luckily this one that we remanned only took a seal/bearing kit and cost less than half of an OE reman. #turbotuesday #turbolife #navistar #borgwarnerturbo #diesellife @ Diesel Performance Engineering

It's not very often we see brand new Stanadyne DC style injection pumps anymore. One of our customers had this one for a...
02/29/2020

It's not very often we see brand new Stanadyne DC style injection pumps anymore. One of our customers had this one for a 645b loader on his shelf that he wanted checked out before selling. Good thing too, because the governor ring was dry rotted. #fuelpumpfriday #daylatedollarshort #diesellife #dieselmechanic #stanadyneinjectionpump #fiatallis @ Diesel Performance Engineering

We're giving a little love to this 2008 Dodge 6.7L turbo on #turbotuesday. This one was giving codes for vane/actuator f...
02/26/2020

We're giving a little love to this 2008 Dodge 6.7L turbo on #turbotuesday. This one was giving codes for vane/actuator failure. Upon inspecting the vane assy was excessively worn on most of the outer vanes (2). We upgrade the original vane assy to a coated vane assy to prevent future wear and sticking as well as replace the actuator (3). #diesellife #turbodiesel #dodge #turbolife #holsetturbo #dieselnation #dieselmechanic #dieselrepair @ Diesel Performance Engineering

It's #turbotuesday and we don't want to disappoint. Take a look at this oil (goo) that was lubricating an S300/S400 comp...
02/19/2020

It's #turbotuesday and we don't want to disappoint. Take a look at this oil (goo) that was lubricating an S300/S400 compound we had in this week. One of the cheapest ways you can safeguard your engine/turbochargers are maintaining proper oil change intervals. #oilchange #turbolife #turbodiesel #borgwarnerturbo #compoundturbo #dieselnation #diesellife #mechaniclife #mechaniclife @ Diesel Performance Engineering

We're a day late on our #fuelpumpfriday post but late is better than never. We had 3 Sigma pumps come in to be checked o...
02/15/2020

We're a day late on our #fuelpumpfriday post but late is better than never. We had 3 Sigma pumps come in to be checked out for the Outlaw limited pro class (15MM B&P max) 2 of the the 3 were in great condition, one we found just in time to prevent a cam lobe from causing some major damage. Time to repair the cam and get this pump running again #tractorpulling #diesellife #mechanic #repairshop #fuelinjection #outlawtruckandtractorpulling @ Diesel Performance Engineering

We had a 2012 Duramax in the stall and noticed some exhaust that looked like it was coming out of the V-band on the turb...
02/12/2020

We had a 2012 Duramax in the stall and noticed some exhaust that looked like it was coming out of the V-band on the turbine housing of the turbo. Upon further inspection we found a crack running along 3-4 inches of the casting, causing an exhaust leak. #turbotuesday #turbolife #duramax #diesellife #dieselnation

Time for some trouble shooting on this P7100. After the customer put some upgrades in the pump decided it didn't want to...
02/07/2020

Time for some trouble shooting on this P7100. After the customer put some upgrades in the pump decided it didn't want to run quite right anymore. #fuelpumpfriday #fuelinjection #bosch #p7100 #dieselmechanic #diesellife

We've been a little lazy on our social media posts this year but it's never too late to get back on track. This #turbotu...
02/05/2020

We've been a little lazy on our social media posts this year but it's never too late to get back on track. This #turbotuesday we have a Holset HE431 off of an ISX Cummins that had codes for the vanes. As you can see there was some foreign object damage that bent the nozzle ring (vane assy) and the turbine wheel. Time for some new parts and a facelift and this turbo will be good as new. #turbolife #turbodiesel #cumminspower #holsetturbo #diesellife

Day two at the Nebraska Power Farming Show in Lincoln Ne. The weather is great. The show is great. Come on out and see u...
12/11/2019

Day two at the Nebraska Power Farming Show in Lincoln Ne. The weather is great. The show is great. Come on out and see us.

Rod and Levi are all set up for the next 3 days at the Nebraska Power Farm Show in Lincoln!  Don't worry though, our fea...
12/10/2019

Rod and Levi are all set up for the next 3 days at the Nebraska Power Farm Show in Lincoln! Don't worry though, our fearless leader Darla is in charge at the shop and can take care of any of your needs.

Another Tuesday, another turbo. This one is an exchange 6.7L ball bearing Powerstroke turbo. #turbotuesday #turbolife #g...
11/06/2019

Another Tuesday, another turbo. This one is an exchange 6.7L ball bearing Powerstroke turbo. #turbotuesday #turbolife #garretturbo #turbodiesel #fordtrucks #diesellife #dieseltrucks

This is why we don't buy cheaper products online and why we warn customers against doing so. This was a knockoff of a Bo...
10/29/2019

This is why we don't buy cheaper products online and why we warn customers against doing so. This was a knockoff of a BorgWarner turbo. #turbotuesday #turbolife #onlythebest #diesellife #trucking #mechaniclife

We're all stocked up on anti-gel fuel additive for the winter. Come in and grab it before it's too late! #diesellife #di...
10/25/2019

We're all stocked up on anti-gel fuel additive for the winter. Come in and grab it before it's too late! #diesellife #dieselmechanic #fppf #fueladditive #onlythebest

Tractor pulling never ends! It's time to give these alcohol burners a little TLC. As you can see one of these bad boys j...
10/16/2019

Tractor pulling never ends! It's time to give these alcohol burners a little TLC. As you can see one of these bad boys just started to rub the housing. For having a whole season of over 100+ lb of boost I'd say they held up pretty good. @ Diesel Performance Engineering

Getting to work on this cummins turbo that decided it wanted to eat something other than air for a change. #turbotuesday...
10/08/2019

Getting to work on this cummins turbo that decided it wanted to eat something other than air for a change. #turbotuesday #turbolife #holsetturbo #hx35 #cummins #turbodiesel #mechaniclife

Doing a little overhaul on this 3020 JD CB pump. They're pretty simple guys, this one was complaining of a leak. Besides...
10/04/2019

Doing a little overhaul on this 3020 JD CB pump. They're pretty simple guys, this one was complaining of a leak. Besides gaskets these are notorious for leaking out of the head screws. So after drilling the old ones out and putting the new ones in with epoxy it's time to wait 24 hours for the epoxy to cure. #fuelpumpfriday #johndeere #stanadyneinjectionpump #reman #oldybutgoody @ Diesel Performance Engineering

Anyone looking for a pulling pump? We're doing a little restocking for the shelf on #fuelpumpfriday! 16MM P7100 and a 13...
09/20/2019

Anyone looking for a pulling pump? We're doing a little restocking for the shelf on #fuelpumpfriday! 16MM P7100 and a 13MM A-Pump with all the goodies. #diesellife #tractorpulling #morefuelmorepower #truckpulling

08/16/2019

It's been a busy week on pulling A-pumps this week. The first one in the video was a 10MM with a cracked barrel, the second was an 11MM with a cam out (the Gatorade bottle contained the "oil" from the pump), and the third was a 13MM with a stuck plunger. All done in time for the weekend. #fuelpumpfriday #tractorpulling #workhustle #dpe #mechaniclife

It's Turbo Tuesday and we upgraded this 4.1" cast wheel to a high performance billet! #tractorpulling #truckpulling #die...
08/14/2019

It's Turbo Tuesday and we upgraded this 4.1" cast wheel to a high performance billet! #tractorpulling #truckpulling #diesellife #billet #turbotuesday #turbolife #custombuild

We just got a shipment in of .450 heads for some of our hot farm pullers. This AC 200 is ready for more fuel than it's e...
08/10/2019

We just got a shipment in of .450 heads for some of our hot farm pullers. This AC 200 is ready for more fuel than it's ever seen before. A few minor adjustments and this DB will ready to calibrate and then hit the dirt #fuelpumpfriday #allischalmers #morefuelmorepower #dpe #stanadyne #tractorpulling

HELP WANTED! WE ARE CURRENTLY HIRING DRIVE IN TECH'S,  FUEL INJECTION/TURBO GURU'S, AND SALES EXTRAORDINAIRE'S. CALL THE...
08/05/2019

HELP WANTED! WE ARE CURRENTLY HIRING DRIVE IN TECH'S, FUEL INJECTION/TURBO GURU'S, AND SALES EXTRAORDINAIRE'S. CALL THE SHOP, STOP BY, OR MESSAGE FOR MORE DETAILS.

None of this is what we like to see our customers bring into the shop: a gummed up pump with a seized head and rotor. Th...
07/19/2019

None of this is what we like to see our customers bring into the shop: a gummed up pump with a seized head and rotor. The cause of failure-contamination! A new head and rotor and a good cleaning of the fuel system and this John Deere loader will be ready to work again #fuelpumpfriday #diesellife #dieselmechanic #dieselrepair #fueltech #johndeere #agriculture #agequipment #stanadyneinjectionpump @ Diesel Performance Engineering

Before and after on this John Deere 8.1L turbo. Even though it has a JD casting this turbo is an S300 made by BorgWarner...
07/09/2019

Before and after on this John Deere 8.1L turbo. Even though it has a JD casting this turbo is an S300 made by BorgWarner, remanned by DPE #turbotuesday #turbolife #johndeere #mechaniclife #diesellife #dieselmechanic #dieselrepair #agriculture

Anyone looking for a performance CAT replacement turbo? This BorgWarner 82MM 1.32 A/R S410 is rated for over 800HP. Call...
07/02/2019

Anyone looking for a performance CAT replacement turbo? This BorgWarner 82MM 1.32 A/R S410 is rated for over 800HP. Call in and ask about other sizing options! #turbotuesday #borgwarner #diesellife #turbolife

We're getting busy going through some Standyne (Roosamaster) injection pumps on this fine #fuelpumpfriday Is anyone able...
06/28/2019

We're getting busy going through some Standyne (Roosamaster) injection pumps on this fine #fuelpumpfriday Is anyone able to tell us what application these two injection pumps go on? #diesellife #dieselmechanic #tractor #fueltech #dieselrepair #stanadyne @ Diesel Performance Engineering

You know it's tractor pulling season when you're installing 360 thrust updates one after another. The top picture shows ...
06/25/2019

You know it's tractor pulling season when you're installing 360 thrust updates one after another. The top picture shows an S400 rebuild with a 360 thrust update and the bottom is a new S300 with a 360 thrust update (from the stock 270 degree). #turbotuesday #turbolife #borgwarner #s400 #s300 #tractorpulling #truckpulling #diesellife

06/21/2019

We're putting our common rail injector tester to work on this set of 5.9L Dodge injectors. This video shows the injector running at full load.

FREE DPE T-SHIRT for the first person who comments with the correct cause of destruction of these HX80 turbos. #dpe #tur...
06/18/2019

FREE DPE T-SHIRT for the first person who comments with the correct cause of destruction of these HX80 turbos. #dpe #turbotuesday #turbolife #tractorpulling #outlawtruckandtractorpulling #ntpatractorpulling #dieselmechanic @ Diesel Performance Engineering

Introducing our biggest and baddest turbine wheel to date. From a beefed up shaft, thicker hub, and wider/taller fin des...
06/11/2019

Introducing our biggest and baddest turbine wheel to date. From a beefed up shaft, thicker hub, and wider/taller fin design this wheel will hold up to the rigors of the track. (Left-stock g-trim Holset 4.4" wheel. Right-new DPE monster shaft design) #dpe #tractorpulling #diesellife #engineeredright #turbolife #turbotuesday #biggerisbetter @ Diesel Performance Engineering

Time to give this Dodge pump some lovin'. #fuelpumpfriday #dpe #bosch #ve  @ Diesel Performance Engineering
06/08/2019

Time to give this Dodge pump some lovin'. #fuelpumpfriday #dpe #bosch #ve @ Diesel Performance Engineering

06/05/2019

Today was a busy Turbo Tuesday. 5-GT42 ball bearing turbos assembled, a set of C13 twin turbos, and a TV75. We are still looking for a new tech! Please spread the word and have anyone interested call Rodney at 816-324-6680.

We are currently looking for a full time drive in/service technician! Competitive pay and benefits will be provided. For...
05/28/2019

We are currently looking for a full time drive in/service technician! Competitive pay and benefits will be provided. For more information call Rodney at 816-324-6680 or stop on by the shop.

Address

201 N 5th St
Savannah, MO
64485

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00

Telephone

+18163246680

Alerts

Be the first to know and let us send you an email when Diesel Performance Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Diesel Performance Engineering:

Videos

Nearby event/venues


Comments

You have private messages.........
You have private messages........